Product Showcase

  1. High Gain, High Linearity Driver Amplifier: QPA9120
    10/10/2018

    Qorvo’s new QPA9120 is a high gain, high linearity driver amplifier able to operate over the 1.8 to 5.0 GHz frequency range. This amplifier features exceptional performance with 36 dBm output 3rd order intercept (OIP3) power and 22 dBm output 1dB compression (OP1dB) power while consuming less than 100 mA DC current with single 5V supply.

  2. Filtering Components For 5G Networks
    10/9/2018

    As 5G testing continues to grow and demand more requirements for filtering components. Corry Micronics (CMI) has developed all types of filtering using different technologies, and several that have been allocated for 5G. At lower frequencies in the US market centered around 600 MHz, filtering can be easily, and cost competitively designed using several different filtering technologies. Types of filters range from LC to cavity, combline, interdigital, Helical, ceramic resonator, and tubular.

  3. 8000 Watts Pulse, 1 - 2 GHz Solid State Pulsed Amplifier: Model 8000SP1G2
    10/3/2018

    The Model 8000SP1G2 from AR is a self-contained, forced-air-cooled, broadband solid-state amplifier that operates over the 1 to 2 GHz frequency range, and is designed pulse applications at low duty factors where instantaneous bandwidth and high gain are required. The low level of spurious signals and linearity of this device makes the 8000SP1G2 ideal for test and measurement, (including EMC RF pulse susceptibility testing), industrial and university research and development, and service applications.

  4. 400 MHz To 6 GHz Wilkinson Power Divider Models With N Female Covering
    10/3/2018

    JFW offers a new family of wideband Wilkinson type power dividers/combiners that are ideal for wireless testing labs utilizing N female connectorized RF test setups. The family comprises three separate models.

  5. LTE Universal Multi-Band Front-End Module For IoT: SKY68020-11
    9/20/2018

    Skyworks offers the new SKY68020-11 LTE universal hybrid, multi-band multi-chip RF front-end (RFFE) module supporting cellular LTE-M/NB-IoT (half-duplex system) transceiver platforms operating in low-band (5, 8, 12, 13, 14, 17, 18, 19, 20, 26, 28, 71, and 85), and mid-band (1, 2, 3, 4, 25, 39, 66, and 70) frequencies.

  6. 0.1 – 18 GHz Solid State Programmable Attenuator: 50P-2068
    9/20/2018

    JFW’s 50P-2068 is a programmable attenuator designed for testing applications covering the 0.1 to 18 GHz frequency range. The system has a total 31 dB attenuation (in 1 dB steps), is rated for +20 dBm RF input power, and comes with SMA female coaxial RF connectors.

  7. 8.5 – 10.5 GHz GaN T/R Module: QPM1002
    9/17/2018

    Qorvo introduces the new QPM1002 GaN MMIC front-end module (FEM) designed specifically for X-band radar applications in the 8.5 – 10.5 GHz frequency range. Combining a T/R switch, low-noise amplifier, and a power amplifier, this device delivers a small signal gain of 33 dB, delivers 3 W of saturated power, and 25 dB of large signal gain.

  8. 4.4 – 5.0 GHz GaN Power Amplifier Module: QPA4501
    9/4/2018

    Qorvo’s QPA4501 is an integrated 2-stage Power Amplifier (PA) module designed to cover the frequency range of 4.4 to 5.0 GHz. This device is optimized for 5G massive MIMO, W-CDMA/LTE, macro and micro cell base station, active antenna, and other general purpose applications.

  9. 2.4 GHz Wi-Fi/BT/LTE Co-Existence BAW Filter: QPQ1907
    9/4/2018

    Qorvo’s QPQ1907 is a high-performance, high power Bulk Acoustic Wave (BAW) band-pass filter designed to enable coexistence of WiFi and LTE signals within the same device or in close proximity to one another. This device is ideally used in WiFi/Bluetooth, consumer premise equipment (CPE), small cells, and smart meter applications.

  10. GNSS Low-Noise Amplifier Front-End Modules With Integrated Pre-Filters And Post-Filters
    8/24/2018

    Skyworks offer two new front-end modules (FEMs) for GNSS/GPS/GLONASS/Galileo/Compass/QZSS radio receiver applications in the 1559 to 1606 MHz frequency range. The SKY65933-11 and the SKY65943-11 feature an integrated low noise amplifier (LNA), and a pre-filter and post-filter. Both devices use surface-mount technology (SMT) in the form of a 2.5 x 2.5 mm Multi-Chip Module (MCM) package, which allows for a highly manufacturable and low-cost solution.