See yourself at IMS! The IEEE MTT-S IMS2023 is the must-attend event for the microwave and RF community. In one week, you can gain the knowledge you need to achieve your professional goals for the entire year. Join us in San Diego, CA, June 11-16, 2023, and discover The Coolest Ideas Under the Sun! Register Now!
GaN technology stands out thanks to its high-current, high-voltage capabilities. Its unique material properties make it the new go-to technology in everything from 5G communications to automotive, lighting, radar, and more.
While both pacemakers and ICDs are implantable medical devices designed to improve the quality of life for people with heart arrhythmia, each device serves a different purpose.
In part 4 of this series, we address the challenge of timing alignment between 5G base stations as this has a large effect on inter-cell interference and, consequently user experience.
VSWR happens from having an impedance mismatch between a source and a load. VSWR is not a hard concept to grasp, but its effects on the instrumentation can be more difficult to realize.
Application Note |
By Doug Jorgesen,Marki Microwave
The proper way to apply a DC current to the mixer is through a bias tee, allowing the high-frequency output from the mixer to absorb rather than reflect back into the mixer, potentially causing ripple or other degradation to the performance of the IQ mixer as a vector modulator.
AR's test systems can deliver a solution that integrates all your testing needs. AR's customized solutions include radiated and conducted immunity, radiated and conducted emissions, and more.
Learn how Remcom’s WaveFarer® Radar Simulation Software uses ray-tracing to simulate virtual drive scenarios and predict radar returns as a system moves through an environment with vehicles, roadway structures, pedestrians, and other objects.
The Model 9000SP1z2G1z4 is a self-contained, forced-air-cooled, broadband solid-state microwave amplifier designed for pulse applications at low duty factors where instantaneous bandwidth and high gain are required.
