Newsletter | August 10, 2023

08.10.23 -- Pasternack Debuts G-Type (Round) Mounts For Standard Gain Horn Antennas
 
Resources
5G NTN Takes Flight: Technical Overview Of 5G Non-Terrestrial Networks
White Paper | Rohde & Schwarz GmbH & Co. KG

This white paper offers an overview of 5G non-terrestrial networks (NTN) technology and its challenges, incorporating the latest state of 3GPP standardization work.
Head-To-Head Coaxial Interconnect Vs. OTA Testing For 5G
Article | By JJ Delisle, JFW Industries, Inc.

OTA testing can revolutionize wireless device testing and allow for innovative testing of AAS and antenna array tech.
Wi-Fi 6 Solutions: Extended Measurement Duration
Application Note | Wireless Telecom Group

Boonton's USB RF power sensors with RTPP tech and complementary software offer accurate Wi-Fi 6 characterization with measurement windows and speeds needed for efficiency, battery life, and better operation in dense environments.
Building Stable And Reliable Wireless EV Charging Technology
White Paper | Knowles Precision Devices DLI

Explore how wireless charging works, identify the challenges presented by wireless charging of EVs both at a system and a component level, and discuss how Knowles Precision Devices’ components can help address these challenges.
Industry News
Featured Multimedia
Webinar: WaveFarer Radar Analysis With Diffuse Scattering And Backscatter
 

Learn about WaveFarer's new features for automotive and indoor radar applications, including diffuse scattering from rough surfaces such as roads and the ability to transmit through walls, windows, and more. Remcom demonstrates these and other new capabilities using a sample drive scenario as well as an indoor mmWave sensor scenario.
Bulletin Board
IMS 2023 Demonstration: RF Interference Tolerance Testing
 

Revisit the IMS 2023 exhibition hall and learn how highly controlled additive white Gaussian noise (AWGN) generation can test system robustness and noise tolerance.
Featured Products And Services
4×4 Butler Matrix: KBM9100400

The new KRYTAR 4×4 Butler Matrix uses KRYTAR’s high-performance 90- and 180-degree Hybrid Couplers providing super phase accuracy, amplitude imbalance, stability and repeatability.
Download Datasheet
• Request Information
Krytar
10MHz To 67GHz Broadband Balun: EBAL-0067

The EBAL-0067 is an ultra-broadband balun, hand-tuned for optimal phase and amplitude balance over a 10 MHz to 67 GHz bandwidth.
Download Datasheet
• Request Information
Marki Microwave
26.5 - 40 GHz, 10W Min Solid State High Power Amplifier: AMP4072A

The AMP4072A solid-state, high-power amplifier has a broad frequency range of 26.5 to 40.0 GHz with a power output of 10 watt minimum and 12 watt typical in continuous wave (CW) or pulse mode at Psat, and 8 watt typical at P1dB.
Download Datasheet
• Request Information
Exodus Advanced Communications
Broadband Power Amplifier: 800W1000

The Model 800W1000 is a solid-state, Class A design, self-contained, air-cooled, broadband power amplifier designed for applications where instantaneous bandwidth, high gain and linearity are required.
Download Datasheet
• Request Information
AR
27.5 - 31 GHz Spatium Solid-State Power Amplifier: QPB2731N

An excellent alternative to traveling wave tube amplifiers, Qorvo's Spatium™ QPB2731N is a solid state, spatial combining amplifier with an operating range of 27.5 - 31 GHz while achieving greater than 49 dBm of instantaneous linear power. 
Download Datasheet
• Request Information
Qorvo