nRF905 Multiband Transceiver
Source: Nordic Semiconductor ASA
The smallest, lowest Bill of Material transceiver for 433/868/915MHz...
The smallest, lowest Bill of Material transceiver for 433/868/915MHz
nRF905 is a single-chip radio transceiver for the 433/868/915 MHz ISM band. The transceiver consists of a fully integrated frequency synthesiser, receiver chain with demodulator, a power amplifier, a crystal oscillator and a modulator. The ShockBurst™ feature automatically handles preamble and CRC. Configuration is easily programmable by use of the SPI interface. Current consumption is very low, in transmit only 11mA at an output power of -10dBm, and in receive mode 12.5mA. Built in power down modes makes power saving easily realizable.
Click here to download the nRF905 datasheet in pdf format.
Features:
- True single chip GFSK transceiver in a small 32-pin package (32L QFN 5x5mm)
- Green lead-free package
- ShockBurst mode for low power operation
- Power supply range 1.9 to 3.6V
- Multi channel operation - ETSI/FCC Compatible
- Channel switching time <650µs
- Extremely low cost Bill of Material (BOM)
- No external SAW filter
- Adjustable output power up to 10dBm
- Carrier detect for "listen before transmit" protocols
- Data Ready signal when a valid data package is received or transmitted
- Address Match for detection of incoming package
- Automatic retransmission of data packages
- Automatic CRC and preamble generation
- Low supply current (TX), typical 11mA @ -10dBm output power
- Low supply current (RX), typical 12.5mA
Benefits:
- Protocol pre-processing on-chip
- No trimming in production
- Smallest available BOM and footprint
- No need for external SAW filter
- Fulfills current and future regulations on Green electronics
Applications:
- Wireless data communication
- Alarm and security systems
- Home Automation
- Remote control
- Surveillance
- Automotive
- Telemetry
- Industrial sensors
- Keyless entry
- Toys
This website uses cookies to ensure you get the best experience on our website. Learn more