Newsletter | September 14, 2023

09.14.23 -- Electric Vehicle On-Board Charging Systems

FEATURED ARTICLE

Electric Vehicle On-Board Charging Systems

On-board charging systems (OBCs) transform external AC power into DC voltage to charge vehicle batteries while monitoring and ensuring safe charging.

RESOURCES

5G TDD Network Solutions – Precision Timing

TDD implementation demands precise timing and synchronization between transmitter and receiver, as components switch between transmit and receive rapidly, down to the microsecond or nanosecond range, depending on the application and network infrastructure.

What Are EMI Filters?

An EMI filter is used to mitigate undesirable electromagnetic emissions or disturbances that can disrupt electronic systems, ensuring electromagnetic compatibility in the same environment.

How Will 5G Development Impact EMC Susceptibility Testing?

Although 5G is here, cellular technology evolution will continue to progress, and the standards of testing these new evolutions will inevitably lag the technology development.

Certium VCS Test System For Aircraft Manufacturers

Certium VCS is a cost-effective, space-saving, and scalable IP-based infrastructure for testing radiocommunication systems in new aircraft.

INDUSTRY NEWS

u-blox Introduces Its First Cellular & Satellite IoT Module With Embedded Positioning

Saelig Introduces Siglent SSG6000A Microwave Signal Generators

Keysight To Showcase Solutions That Accelerate Radio Frequency Innovation At EuMW23

Peraso Announces PRM2144X Release In PERSPECTUS mmWave Module Lineup

ZTE Clinches Leadership Position In 5G RAN, Propelling Global 5G Infrastructure Dev

PolyPhaser Offers New Active GPS Timing Antenna With High Gain, Low Noise

Pasternack Expands Programmable, Voltage-Controlled Phase Shifters

CEVA Bluetooth 5.4 IP Achieves SIG Qualification

NETSCOUT Introduces RAN Analytics For Carrier Aggregation

Fairview Microwave Breaks Ground With Advanced Vehicle GPS Antennas

Rohde & Schwarz And Greenerwave Collab To Verify RIS Modules & Drive 6G Research

FEATURED MULTIMEDIA

5G & WiFi 6E Passive Components And RF Test Systems

5G Wi-Fi 6E devices and cellular infrastructure have evolved with more complex multi-band transceivers and new frequency bands that wireless test engineers must address. In this video, learn about JFW test systems, components, and customization offerings.

BULLETIN BOARD

Emulating Non-Terrestrial 5G

Keysight’s Randy Becker provides a demonstration of Keysight's NTN testbed applying timing and Doppler pre-compensation, using extended hybrid automatic repeat request (HARQ), and measuring device-under-test block error ratio (BLER) and throughput.

FEATURED PRODUCTS AND SERVICES

Wireless InSite 3D Wireless Prediction Software

Wireless InSite is a suite of ray-tracing models and high-fidelity EM solvers for the analysis of site-specific radio wave propagation and wireless communication systems. The RF propagation software provides efficient and accurate predictions of EM propagation and communication channel characteristics in complex urban, indoor, rural, and mixed path environments.

Download Multimedia

• Request Information

Remcom

2.5 - 4 GHz 6-Bit Digital Phase Shifter Production: QPC2108

The Qorvo QPC2108 is a packaged 6-bit digital phase shifter fabricated on Qorvo's high-performance 0.15 um GaAs pHEMT process.  It operates over 2.5 - 4 GHz while providing 360 degrees phase coverage with an LSB of 5.625.

Download Datasheet

• Request Information

Qorvo

SPDT Terminated RF Switch Type N: B6 Series

The B6 Series offers outstanding RF performance across all frequency bands with various configuration and voltage options, low insertion loss, high isolation, excellent repeatability, and additional customization choices.

Download Datasheet

• Request Information

dB Control