Newsletter | January 25, 2024

01.25.24 -- Assessing 5G Radar Altimeter Interference For Realistic Instrument Landing System Approaches


On-Wafer Characterization At sub-THz Frequencies

New technologies and applications extend into sub-THz frequencies in the D band and beyond. New semiconductor technologies and processes need to be commercialized to support these efforts.

Understanding Equivalent Series Resistance And Q Factor

Equivalent Series Resistance (ESR) and Quality Factor (Q factor) are important figures in circuit design and understanding their value is key. Learn more about the roles of both factors.

Assessing 5G Radar Altimeter Interference For Realistic Instrument Landing System Approaches

Explore the use of 3D Wireless Prediction Software to simulate the level of radar interference received in a landing aircraft due to emissions from 5G base stations close to an airport's runway.

Power Solutions For GaN PAs

Learn how PMICs can design and control RF GaN PA technology in various applications and help overcome hurdles in RF Front-End (RFFE) design to help achieve peak performance.


Battelle RavenStar Antenna Tech Achieves Telecom Industry 1st At VT-ARC Testing Site

Peraso Launches Platform For Dense Urban mmWave Fixed Wireless Access

Fortinet Announces The Industry’s First Wi-Fi 7–Enabled Secure Networking Solution

Fixed Wireless Access Equipment Spend To Exceed $40B Over The Next 5 Years

Rohde & Schwarz Mobile Test Summit On Trends In Wireless Communications

Keysight Helps To Achieve 1Tbps Throughput Using Terahertz Frequencies

Renesas Launches RZ/G3S 64-Bit MPU For IoT Edge & Gateway Devices

Anritsu & ASUS To Validate IEEE 802.11be (Wi-Fi 7) 320 MHz RF Perf Testing

Micsig MHO3 Series 500MHz High Res Oscilloscopes With 14” Touchscreen

Zyxel Communications Achieves Wi-Fi Alliance’s Wi-Fi 7 Certification

Nokia & NTT Successfully Demo Applicability Of APN Tech To Mobile Fronthaul


Principles Of Power Measurement Guide

Explore this guide, which offers a concise overview of important power measurement topics like detection of RF power, rise time and video bandwidth, peak and average power, and more.


Non-Blocking Matrix Switch: 50MS-426

The 50MS-426 is a 50 Ohm non-blocking matrix switch operating 350-6000MHz that can be remotely controlled via Ethernet or RS-232 connection, and the IP settings can be manually set via the front panel display.

Download Datasheet

• Request Information

JFW Industries, Inc.