Agere Introduces Dual-Mode UMTS/EDGE, W-EDGE Baseband Solution
Allentown, PA -- Agere Systems today announced general availability of its chipset and software solution for mass market, dual-mode UMTS/EDGE multimedia mobile handsets enabling seamless handovers between 3G/UMTS and 2.5G/EDGE networks. Agere's Sceptre HPU solution, which sampled to lead customers in July 2004, integrates a dual-mode software core based on a proven and tested GPRS and EDGE protocol stack that has been incorporated into millions of wireless handsets already deployed on the market today. Delivering up to 384 kilobit-per-second (kbps) downloads in 3G/UMTS coverage areas and up to 220 kbps in 2.5G/EDGE coverage areas, Agere's dual-mode technology provides data transmissions at rates that are seven times faster than most wireline PC dial-up connections. Agere will show the Sceptre HPU solution during the 3GSM World Congress (February 14-17, 2005; Cannes, France).
Operators are focused on providing consumers with innovative wireless data applications and multimedia services such as real-time audio and video streaming. These new services require higher data bandwidth and capacity, but they also give operators the opportunity to increase their average revenue per user. To support these services, operators are rapidly deploying networks based on two advanced technologies -- EDGE and UMTS -- with major urban areas earmarked for 3G deployments first. These plans make dual-mode W-EDGE handsets critical for continuous delivery of 3G services and ensuring widespread user acceptance throughout the multiple stages of infrastructure rollout.
Current third-generation devices provide access to 3G services when in range of a UMTS cell site, but drop back to GPRS data rates of around 40 kbps when consumers are outside of 3G/UMTS coverage. Agere's solution enables handsets to drop back to an EDGE connection of up to 220 kbps, which is important for maintaining the full performance of some 3G services.
"We are sure that dual-mode handsets combining 3G/UMTS and EDGE technologies will be essential in supporting seamless, high-data rate connections for the foreseeable future and we are positioning Agere for leadership in addressing this requirement," said Luc Seraphin, VP for Agere's Mobility Division. "Handsets based on our W-EDGE solution will deliver the full service connections that consumers will expect, wherever they are, even outside of UMTS network range."
Agere's three-chip W-EDGE solution is based on its Sceptre architecture, which has been optimized over multiple generations to meet the quality, size, and cost requirements of today's compact handset models. Sceptre HPU's small footprint is achieved by integrating baseband processing and power management functions. This level of integration also reduces power consumption and facilitates slower clock speeds and reduced current leakage, which lowers power consumption and supports handset talk times of up to 4 hours and standby time of up to 300 hours.
Sceptre HPU is 3GPP release 99-compliant, which is the global standard for 3G/UMTS solutions. It supports the 800/850/1800/2100 MHz frequency bands and offers quad voice codec implementation. The chipset also provides a flexible radio frequency interface that enables handset designers to select open market radio frequency and power amplifier solutions.
The solution is scalable for a broad range of models within manufacturers' 3G portfolios, from entry to mid-level and high-end solutions, with proven interfaces designed to work with multimedia extensions and applications processors. Sceptre HPU also includes support for full-duplex speakerphone, MP3 playback, AAC playback, MPEG-4 playback/record, and a SD/MMC memory card interface.
Agere expects to deliver the solution in production quantities by the second half of the year.
Source: Agere Systems