Amplifiers- 6.5 Watts CW, 0.8 to 4.2 GHz
The Model 5S1G4 amplifier is a solid state, self-contained, air-cooled, broadband amplifier designed for applications where instantaneous bandwidth and high gain are required. Housed in a stylish contemporary cabinet, the unit is designed for benchtop use, but can be removed from the cabinet for immediate equipment rack mounting.
Click Here To Download:
•Datasheet: Amplifiers- 6.5 Watts CW, 0.8 to 4.2 GHz - Model 5S1G4
The Model 5S1G4 amplifier is a solid state, self-contained, air-cooled, broadband amplifier designed for applications where instantaneous bandwidth and high gain are required. Housed in a stylish contemporary cabinet, the amplifier is designed for benchtop use, but can be removed from the cabinet for immediate equipment rack mounting. The 5S1G4 amplifier, when used with a sweep generator, will provide a minimum of 5 watts of RF power. Included is a front panel gain control which permits the operator to conveniently set the desired output level.
The 5S1G4 microwave power amplifier is protected from RF input overdrive by an RF input leveling circuit which controls the RF input level to the RF amplifier first stage when the RF input level is increased above 0 dBm. The RF Amplifier stages are protected from over temperature by removing the DC voltage to them if an over temperature condition occurs due to cooling blockage or fan failure. There is a fault lamp on the rear panel to indicate an over temperature or power supply fault condition. The unit can be returned to operate when the condition has been cleared.
Click Here To Download:
•Datasheet: Amplifiers- 6.5 Watts CW, 0.8 to 4.2 GHz - Model 5S1G4