Newsletter | October 13, 2022

10.13.22 -- Verizon Deploys Additional 5G Ultra Wideband To Help With Hurricane LAN Recovery

Featured Article
Reducing Development Risk In Communications Applications With High-Performance Oscillators

New oscillator products powered by 4th Generation DSPLL Technology are addressing 25/40/50/100/400Gbps timing challenges and making it easy to design with confidence and de-risk product development.

5G TDD Network Solutions – Precision Timing

TDD implementation requires superior synchronization and precise timing at the transmitter and receiver to avoid latency and timing overlap. Occurring within mobile devices as well as base stations, the location of components responsible for transmit/receive switching is dependent on the application and network infrastructure, and each operates at a rapid pace, typically down to the microsecond or nanosecond time range.

Radio Architecture Matters: A Review Of RF Sampling Vs. Zero-IF

The growing demand for wireless services not only challenges our limited spectral resources, it also challenges the radio designer to select the correct radio architecture. This article will examine two common radio architectures and learn how each solves the unique challenge of growing co-location issues.

Filter Basics 8: An In-Depth Look At Bandwidth

In part 8 of the Filter Basics Series, we dive into bandwidth's history, how it dictates data rate, and why the filter type required depends on an application's bandwidth requirements.

Industry News
Featured Multimedia
Webinar: XFdtd’s Schematic Editor For Matching Network & Corporate Feed Network Analysis

In this webinar, learn about XFdtd’s schematic editor and frequency-domain circuit solver for analyzing matching networks and corporate feed networks.

Bulletin Board
4 Ways To Build Your Power Supply Skill Set

Today’s designs place higher demands on the systems that power them, and you may find that more of your design problems are being caused by these power systems. Here are four ways to build your power supply skill set.

Featured Products And Services
Power Amplifier: 500S1G6C

The Model 500S1G6C is a solid-state, Class A design, self-contained, air-cooled, broadband power amplifier designed for applications requiring instantaneous bandwidth, high gain, and linearity.

Request Information
Solid-State Programmable Attenuator: 50P-1501

Model 50P-1501 is a 50 Ohm solid-state programmable attenuator with attenuation range 0 to 127dB by 1dB steps. It operates 200 MHz to 3 GHz and is rated for +20 dBm of RF input power. This step attenuator is available with BNC, N, or SMA coaxial RF connectors. The attenuator has seven individually controlled steps: 1dB, 2dB, 4dB, 8dB, 16dB, 32dB, and 64dB.

Request Information
JFW Industries, Inc.
Advanced COT PMIC With 3 Bucks, 2 LDOs And Load Bypass Switches: ACT88329

The ACT88329 PMIC is an ActiveCiPS power management integrated circuit powering a wide range of processors including solid-state drive applications, video processors, wearables, and microcontrollers.

Request Information
RF Attenuator: LCAT1004-10

The 10 dB Fixed Attenuator LCAT1004-10 is rated to 2 Watts and operates from DC to 6 GHz. The versatile coaxial package uses type N male to type N female connectors and is also RoHS compliant.

Request Information
L-Com Inc.