Newsletter | February 27, 2020

02.27.20 -- Selecting Microstrip Filters To Deliver Small Size At High Frequencies

 
Featured Article
Selecting Microstrip Filters To Deliver Small Size At High Frequencies
By Knowles Precision Devices DLI

When selecting a filter implementation, one common factor across all frequencies is optimizing the size of the filter to the application and its required performance. This article discusses the benefits of microstrip filters to deliver higher frequencies in mmWave applications at smaller component sizes.

Resources
Datasheet: Assemblies (FT) Mounting Height 6.3 mm
Datasheet | Corry Micronics, Inc.
Filtered connectors are available in pin counts from 9 to 50 pin. Micronics offers the d-sub miniature connectors in "C" and "Pi" configurations. Filtered d-sub miniature connector adapters are also available in several different values.
Field Analyzers In EMC Radiated Immunity Testing
Application Note | AR

In radiated immunity testing, it is common practice to utilize a radio frequency (RF) field probe to measure the electric field at the location of the unit under test (UUT). Most RF field probes are designed to measure the root mean square (RMS) of a continuous wave (CW) electric field over a broad range of frequencies and amplitudes.

Industry News