Newsletter | September 30, 2021

09.30.21 -- RF Power Amplification 101: Waveform Basics

 
Featured Article
Resources
RF And MW Control Products In Silicon

There are inherent advantages of silicon technology are benefits of Analog Devices’ new RF and microwave (MW) switch and attenuator products implemented in advanced silicon process, when compared to legacy counterparts using gallium-arsenide (GaAs). This paper provides highlights on features and key performance parameters of the new switch and attenuator products. 

Managing High-Temperature Electronics Environments Down To The Component Level

As complex electronic systems become more prevalent in our daily lives, the demand for high-temperature, high-reliability components continues to increase. To meet the brief, material and design of these high-temperature components must deviate from today’s standard.

Fundamentals Of Radome And Bumper Measurements Using The R&S®QAR

Radome testing is a necessity, checking sensor components for radar compatibility. Previously, there were two methods used for testing. R&S introduces the R&S®QAR as another solution. 

Industry News
Featured Multimedia
Using Wavefarer Automotive Radar Simulation Software And Chirp Doppler To Assess Radar Performance For Drive Scenarios
 

This presentation demonstrates ray-tracing and scattering simulations from Remcom’s WaveFarer combined with chirp Doppler analysis algorithms to assess radar performance for drive scenario simulations.

Bulletin Board
Webinar: Smart Home Device Design And WiFi Connectivity Using EM Simulation
 

Recent advances in smart devices and communication technologies offer a variety of innovative smart home solutions. The smart home concept includes establishing reliable links between various devices including speakers, thermostats, doorbells, and cameras.

Featured Products And Services
Skyworks Automotive

Skyworks offers groundbreaking in-vehicle technologies with seamless connectivity to make the driving experience increasingly smarter and safer. Their suite of communication technologies and products are designed to support standards between full automotive grade AEC and consumer grade JEDEC.

Request Information
Skyworks Solutions, Inc.
RF Test Systems

JFW offers a large variety of RF test systems with custom capabilities in RF attenuation and switching. Some of the many components available include attenuator assemblies, transceiver testing solutions, RF switch assemblies, RF matrix switches, handover test systems, and other custom RF test systems.

Request Information
JFW Industries, Inc.
7.9 - 11 GHz, 15 Watt GaN Power Amplifier: QPA1010, QPA1010D

Qorvo's QPA1010, QPA1010D are X-band high power MMIC amplifiers, fabricated on Qorvo's production 0.15um GaN on SiC process (QGaN15). These amplifiers operate from 7.9 - 11 GHz and typically provide 15 W saturated output power with power-added efficiency of 38% and large-signal gain of 18 dB.  

Request Information
Qorvo
Non-Blocking RF Matrix Switch: RFMS8X8-1-18GNB

The RFMS8X8-1-18GNB is an 8 input and 8 output non-blocking RF matrix switch that allows any of the 8 inputs to be routed to any or all the 8 outputs.  The unit operates over the frequency range of 1 GHz to 18 GHz and has signal gain, frequency compensation and controlled path lengths.  These features provide minimal signal loss, minimal frequency response variations and matched time delay between paths. 

Request Information
Corry Micronics, Inc.
Solid-State, Class A Amplifier: 750S1G6C

The Model 750S1G6C is a solid-state, Class A design, self-contained, air-cooled, broadband power amplifier designed for applications where instantaneous bandwidth, high gain and linearity are required. 

Request Information
AR