Newsletter | November 4, 2021

11.04.21 -- Microwave Synthesizer Offers Multioctave Frequency Coverage

 
Featured Article
Resources
Conducted Immunity Test Method

The foundation for consistent and meaningful conducted immunity testing comes from defining the appropriate combination of amplification, injection device, and test set-up. RF conducted immunity (CI) is the test method and standard that substitutes for radiated immunity (RI) testing at lower frequencies.

Radiation Immunity Of Skyworks Optocouplers

Neutron irradiation at two different neutron fluence levels were performed on our integrated detector optocouplers, OLI300, 400, and 5OO. The results of the test showed that these types of optocouplers are tolerant to high radiation levels and are suitable for applications in high radiation environments.

EM Simulation Of 140 GHz Antenna Array For 6G Wireless Communication

In this example, a 140 GHz slot antenna array excited by a substrate integrated cavity is demonstrated for use in wireless communications.

Simplifying 5G Radio Design With A New Range Of 28 GHz Bandpass Filters

As 5G innovation forges on, radio systems continue to emerge. Each system has a range of requirements, including specific RF filter performance needs, and it’s up to the 5G FR2 Ecosystem of suppliers to meet that demand. In response, Knowles Precision Devices (KPD) supports a wide variety of 5G radio applications.

RF Detectors Help Solve System Design Challenges

In this presentation, you will learn about what functions detectors can perform and key requirements, how to select the best detector for the task, and selected applications for detectors. 

Industry News
Featured Multimedia
Qorvo’s Design Summit Webinar Series Is Back
 

Join Qorvo November 9-11, 2021 for our new series of webinars exploring the RF and Power technology that is innovating markets for 5G handsets and base stations, defense and aerospace, connected cars and homes and more.

Bulletin Board
RF And EMC Formulas/Charts
 

AR’s poster on RF and EMC formulas provides greater insight into conversion formulas necessary for a 50Ω Environment. This easy to use reference allows you to maximize your test efforts. Additional formulas in the chart include connector power handling vs. frequency, harmonics, antenna equations, field and power calculations, and more.

Featured Products And Services
SPDT Switch for Receive Applications: QPC8015Q

The QPC8015Q is a low insertion loss, high isolation single-pole dual-throw (SPDT) switch with performance optimized for low power routing and diversity applications. The QPC8015Q is controlled by 1 bit GPIO with a compact 0.7 mm x 1.1 mm x 0.59 mm size, which allows for a small solution size with no need for external DC blocking capacitors.

Request Information
Qorvo
Filter Products For 5G FR2 Bands

Knowles Precision Devices (DLI) offers filter technology that addresses the challenge of implementing high-performance filters at mmWave frequencies. Their 26 GHz, 28 GHz, and 39 GHz filter solutions deliver 3 GHz of bandwidth, greater than 50 dB rejection, and are 20x smaller than current alternatives while implemented in surface mount packages for standard tune-free assembly. 

Request Information
Knowles Precision Devices DLI
Phase Noise Analyzer And VCO Tester: R&S FSPN

The R&S FSPN phase noise analyzer and VCO tester is designed to provide both very high sensitivity and measurement speed for production and design engineers working in these fields characterizing sources such as synthesizers, VCOs, OCXOs, and DROs. It is the ideal instrument for demanding development and production phase noise and VCO analysis.

Request Information
Rohde & Schwarz GmbH & Co. KG
High-Power Broadband Diplexer: CMIDX Series

Corry Micronics' Broadband Diplexer is capable of filtering input power up to 150 WATTS CW. The low and high passbands can be specified by the customer. Temperature range, heat sink requirements, and input power can be customized for each application.

Request Information
Corry Micronics, Inc.
Wideband 8X1 LC Handover System: 50PA-1205

JFW model 50PA-1205 is the widest bandwidth 8X1 LC handover test system test to date, operating at 30-6000MHz. This system consists of eight programmable attenuators (0-95dB x 1dB step) that connect to an 8-Way splitter/combiner.

Request Information
JFW Industries, Inc.