Newsletter | August 26, 2021

08.26.21 -- Mesh Network-Optimized Module Enables Large-Scale IoT Deployments

 
Featured Article
Resources
Building 5G Small Cells Without Compromising Performance

Before small cell technology took its place as a central component to realizing the promise of 5G networks, it played an important role in helping to improve the coverage and capacity of 4G. Utilized to improve service in high-traffic locations, small cells have proven valuable for extending signal penetration and increasing wireless density. 

125 Watts CW Broadband Amplifier: 125S1G6

This self-contained, air-cooled broadband amplifier covers the 0.7 to 6 GHz frequency range and has a 125 watt output power. It’s ideal for applications that require instantaneous bandwidth and high gain.

Industry News
Featured Multimedia
Technical Considerations For Testing 5G Base Station Finals
 

Dale Hauck, an Applications Engineer for AR RF/Microwave Instrumentation, discusses technical considerations for testing 5g base station finals for digital pre-distortion (dpd) characterization.

Bulletin Board
Ultra-Wideband For Dummies
 

This book reveals how UWB will shape the world around us and help businesses, consumers, and industries. It delivers a general understanding of UWB and the different topologies used based on the application. It also paints the picture of a UWB enabled world with current, and future, applications.

Featured Products And Services
5G Urban Small-Cell Analysis

With a tremendous increase in the number of connected devices and mobile data demand predicted over the next decade, the wireless communications industry is exploring new technologies to accommodate 5G wireless data systems, including MIMO (multiple-input, multiple-output) technology and millimeter wave frequency bands.  One of the more complex environments for these technologies are urban small cells, where the prevalence of multipath and non-line-of-sight conditions leads to many challenges, particularly at higher frequencies.

Request Information
Remcom
Customized EMC Test System Solutions

Rohde & Schwarz provides a range of customizable EMC test systems that deliver turnkey automated execution of EMC measurements to meet demanding requirements. As an industry leader for EMI test receivers and broadband amplifiers, Rohde & Schwarz has all the core components required to assemble a complete system.

Request Information
Rohde & Schwarz GmbH & Co. KG
High-Power Broadband Diplexer: CMIDX Series

Corry Micronics' Broadband Diplexer is capable of filtering input power up to 150 WATTS CW. The low and high passbands can be specified by the customer. Temperature range, heat sink requirements, and input power can be customized for each application.

Request Information
Corry Micronics, Inc.
8 x 8 Blocking Matrix Switch DC-18 GHz: 50MS-404

Model 50MS-404 is an 8X8 blocking matrix switch.  All unused ports are absorptive (i.e. self-terminating into 50 Ohm).  It is available with 50 Ohm N or SMA female connectors. 

Request Information
JFW Industries, Inc.
Small Form Factor 8-Channel RF A/D & D/A Subsystem: Model 6350S

The Model 6350S is a small form factor 8-channel A/D & D/A subsystem designed for a variety of applications including high-bandwidth data streaming, waveform signal generators, multimode data acquisition, and other electronic warfare systems. Designed to be integrated into larger systems with minimal design effort, the 6350S delivers the performance and high-channel density of RFSoC in a small, convenient footprint.

Request Information
Pentek, Inc.