Newsletter | December 12, 2019

12.12.19 -- Keysight, MTS Collaborate To Speed Manufacturing Of Millimeter-Wave Semiconductors

Featured Article
V2X: An Important Building Block In Cooperative Intelligent Transport Systems (C-ITS)
By TE Connectivity

V2X is short for “vehicle to everything”. The term describes a vehicle’s communication with surrounding or interacting road users and structures. V2X technology is designed to be able to support autonomous driving and other cooperative intelligent transport systems (C-ITS). This white paper further discusses V2X and its importance in vehicle systems.

Wireless InSite
Datasheet | Remcom

Wireless InSite is site-specific radio propagation software for the analysis of wireless communication systems, wireless networks, sensors, radars, and other devices that transmit or receive radio waves

Simplifying MIMO Antenna Installations With The FlexMIMO Antenna
Application Note | Laird Connectivity

A MIMO (multiple-input, multiple-output) antenna is basically two (or more) antennas located in a single physical structure. With the benefit of multiple antennas rather than just one, data throughput, range, and general performance are greatly enhanced. This application note takes a closer look at MIMO antenna installations and how they can be simplified with FlexMIMO antennas from Laird Connectivity.

AR Interactive MultiStar ROI Calculator
Download | AR

Enter your actual data to discover labor hours savings, ROI and more.

Filter Terminology And Specifications
Article | Knowles Precision Devices DLI

This guide acts as a quick reference for terms used to discuss filter technologies.

Industry News
Featured Multimedia
Sky5 Full Video Demo: SKY5-8254

This video demonstrates the SKY5®- 8254 high band power amplifier with integrated filter solution and its performance in next generation 5G applications.

Bulletin Board
5G And mmWave Testing Brochure

New technologies being deployed will need to rely on the performance of both high-power amplifiers on the transmit side, and low noise amplifiers on the receive side. Quantifying critical specifications like noise figure and noise power ratio can give radio and receiver designers a deep understanding of how the overall system will perform. Noisecom noises sources generate the broadband noise required to do this type of benchmarking and quantify component and system performance across the microwave and millimeter bands.