Newsletter | September 9, 2021

09.09.21 -- Ericsson And Qualcomm Achieve First 5G NR Call On CBRS Spectrum

Featured Article
Need To Increase Your Range By A Factor Of 3? Or A Factor Of 10? Add More Power!

Wireless communication relies on a strong received signal for best performance, whether that performance is high data transmission speeds or clarity of analog voice communications. A weak signal leads to higher error rates, leading to a reduction in data throughput and increased noise and static in voice transmissions.

Application Note: Application Guide To RF Coaxial Connectors And Cables

RF coaxial connectors provide vital RF links in communications, broadcast, EMC testing, commercial and military, as well as test and measurement fields. This article provides guidance and insight in choosing connectors best suited to accommodate your specific application.

Fundamentals Of Radome And Bumper Measurements Using The R&S QAR

Radome testing is a necessity, checking sensor components for radar compatibility. Previously, there were two methods used for testing. R&S introduces the R&S®QAR as another solution. 

Industry News
Featured Multimedia
Design And Assessment Of A 5G Base Station Using Massive MIMO For Fixed Wireless Access

This webinar demonstrates how modeling and simulation can be used to assist system designers, first in the design of a complex antenna array for a base station, and then to assess its potential performance in the field.  

Bulletin Board
The AR “Orange Book Of Knowledge” -9th Edition

The Orange Book of Knowledge (OBK) has grown into much more than we at AR could have ever imagined. For many engineers, this resource book has turned into the “go-to” source for everything and anything related to EMC.


Featured Products And Services
High Grain, Dual CH, LNA+SW Module (3.3 To 4.0 GHz 20W): ADRF5515A

The ADRF5515A is a dual-channel, integrated RF, front-end, multichip module designed for time division duplexing (TDD) applications. The device operates from 3.3 GHz to 4.0 GHz. The ADRF5515A is configured in dual channels with a cascading, two-stage low noise amplifier (LNA) and a high-power silicon singlepole, double-throw (SPDT) switch.

Request Information
Analog Devices
8 x 8 Non-Blocking Switch Matrix

Corry Micronics has developed an 8 x 8 Non-Blocking Switch Matrix that allows any of the 8 inputs to be routed to any or all of the 8 outputs.

Request Information
Corry Micronics, Inc.
L, S, C Band Ceramic RF Band Pass Filters

Skyworks is pleased to introduce its L, S and C Band Ceramic RF Band Pass Filters for GPS, TCAS, Portable Transceiver, Homeland Security Radio, 5G, IOT and medical-based systems. 

Request Information
Skyworks Solutions, Inc.
CATV Hybrid Amplifier: QPA9831

The QPA9831 is a Hybrid Push Pull amplifier module. The part employs GaAs MESFET, GaAs pHEMT and GaN HEMT die and is operated from 45 MHz to 1218 MHz. It provides excellent linearity and superior return loss performance with low noise and optimal reliability.

Request Information