Newsletter | October 27, 2022

10.27.22 -- Anuvu And QEST Introduce New Dual-Panel Ka Antenna
 
Featured Article
Interactivity Test
By Rohde & Schwarz GmbH & Co. KG

5G will enable a new set of services for industrial and automotive purposes. For these future applications, it is key to measure and rate the interactivity of a network and to identify bottlenecks in the transmission.
Resources
Facing Wi-Fi 6 Testing Challenges? Learn How To Measure The RF Power Of Wide Wi-Fi 6 Channels
Article | Wireless Telecom Group

Wireless Telecom Group breaks down how to overcome Wi-Fi 6 testing challenges. In particular, Wi-Fi 6 channel bandwidths, and the subsequent performance demands on RF power measurement test equipment.
Differential Signals In Coaxial Cables
Article | Cadence Design Systems, Inc.

While uncommon, the use of differential signals in analog applications can be used in specialty measurement applications with a custom-built differential driver, or a differential op-amp.
Fine Frequency Control Using The SKY72300, SKY72301, And SKY72302 Dual Synthesizers/PLLs
Application Note | Skyworks Solutions, Inc.

The fine frequency control of Skyworks fractional-N synthesizers using a Voltage Controlled Oscillator (VCO) is a simple and low-cost alternative to pulling the crystal reference frequency.
Industry News
Featured Multimedia
Webinar: WaveFarer Radar Analysis With Diffuse Scattering And Backscatter Through Walls
 

Learn about WaveFarer's new features for automotive and indoor radar applications, including diffuse scattering from rough surfaces such as roads and the ability to transmit through walls, windows, and more. Remcom demonstrates these and other new capabilities using a sample drive scenario as well as an indoor mmWave sensor scenario.
Bulletin Board
5G mmW RF Front-End ICs
 

Analog Devices delivers the industry’s highest performance 5G mmW front-end signal chain solution for next-generation 5G mmW infrastructure. A platform solution is created from complementary building blocks (24 GHz to 48.2 GHz) offering a future-proof design that lowers platform R&D costs and enables faster development times.
Upcoming Webinar
Rethink 5G Testing
 

This webinar will focus on the different markets, device requirements, and associated challenges within 5G devices.
Featured Products And Services
MMIC Power Amplifier: CMPA0560008S

Packaged in a 5×5 mm plastic overmold QFN, the CMPA0560008S provides performance and robustness in a small form factor allowing customers to improve SWaP-C benchmarks in their next-gen systems.
Download Datasheet
• Request Information
Wolfspeed, A Cree Company
50-Ohm Components

JFW offers a large variety of 50 Ohm RF components capable of operating over wide frequency ranges. Some of the many components available include programmable, manually variable, and fixed attenuators, terminations, RF switches, power dividers and combiners, and test accessories. 
• Request Information
JFW Industries, Inc.
Enhanced 250Vac & 305Vac Capacitors

Knowles' latest enhanced range of Safety Certified capacitors complies with international UL/cUL and IEC/EN specifications to offer designers the option of using a surface mount ceramic multilayer capacitor to replace leaded film types.
 
Download Datasheet
• Request Information
Knowles Precision Devices DLI
SiC Power Amplifier: QPA2511

The QPA2511 is a 2-stage L-Band internally matched GaN Power Amplifier Module that operates at pulsed RF CW in frequency range 1.2-1.4 GHz providing 50dBm of saturated output power with 29dB of large-signal gain.
Download Datasheet
• Request Information
Qorvo
Power Amplifier: 125S1G6C

The Model 125S1G6C is a solid-state, Class A design, self-contained, aircooled, broadband power amplifier designed for applications where instantaneous bandwidth, high gain and linearity are required.
Download Datasheet
• Request Information
AR