Products http://www.wirelessdesignonline.com/ 4/10/2008 12:20:00 AM The nRF24L01 is a unique wireless solution for compact, battery operated applications with stringent requirements on battery lifetime and cost. The transceiver operates in the license free worldwide 2.4GHz ISM band. http://www.wirelessdesignonline.com/product.mvc/NRF24L01-Ultra-Low-Power-24-GHz-Transceiver-0001?atc~c=771+s=771+r=001+l=a 4/10/2008 12:20:00 AM Yellowjacket® B/A/N/G Remote ManagerT software is a data monitoring & reporting application that connects to any Yellowjacket® B/A/N/G through a standard 10/100 ethernet connection. http://www.wirelessdesignonline.com/product.mvc/Yellowjacket-BANG-Remote-Manager-Software-0001?atc~c=771+s=771+r=001+l=a 3/31/2008 3:30:56 PM By combining precision crystal technology with a low noise oscillator and multiplier, Greenray Industries has developed a family of miniature Ovenized crystal oscillators that provides excellent noise performance up through 250 MHz http://www.wirelessdesignonline.com/product.mvc/YH518-Low-Phase-Noise-Miniature-VHF-OCXO-0002?atc~c=771+s=771+r=001+l=a 1/4/2008 1:35:00 PM WSN-00198 is a K&L Microwave high-power band reject filter positioned at the output of a VHF-UHF amplifier. The filter attenuates an undesired harmonic by 60 dB, while maintaining low-loss passbands, utilizing special features to extend the upper passband to 500 MHz. http://www.wirelessdesignonline.com/product.mvc/WSN-00198-High-Power-Band-Reject-Filter-0001?atc~c=771+s=771+r=001+l=a 12/21/2007 11:29:00 AM Abante Services offers a full spectrum of PCBA services. http://www.wirelessdesignonline.com/product.mvc/PCB-Assembly-Services-0001?atc~c=771+s=771+r=001+l=a 10/3/2007 10:19:49 AM The IEEE 802.11 Handbook: A Designer's Companion, Second Edition is for the system network architects, hardware engineers and software engineers at the heart of this second stage in the evolution of 802.11 wireless LANs and for those designers that will take 802.11 to the next stage http://www.wirelessdesignonline.com/product.mvc/IEEE-80211-Handbook-A-Designers-Companion-Sec-0002?atc~c=771+s=771+r=001+l=a 5/10/2007 1:49:00 PM Emergent Electronics provides RF modules, including a wireless transceiver model http://www.wirelessdesignonline.com/product.mvc/RF-Modules-0003?atc~c=771+s=771+r=001+l=a 3/22/2007 2:19:00 PM Built with Micron's exclusive DigitalClarity® technology, this sensor features exceptionally low noise levels and low-light sensitivity... http://www.wirelessdesignonline.com/product.mvc/CMOS-Image-Sensor-MT9M131L12STC-0001?atc~c=771+s=771+r=001+l=a 8/7/2006 9:06:00 AM The Model 1500A3 is a self-contained, air-cooled, broadband, solid-state amplifier designed for applications where instantaneous bandwidth and high gain are required. The Model 1500A3, when used with an RF sweep generator, will provide a minimum of 1500 watts of swept power. http://www.wirelessdesignonline.com/product.mvc/1500-Watt-CW-10-kHz-3-MHz-RF-Power-Amplifier-0001?atc~c=771+s=771+r=001+l=a 7/27/2006 8:57:03 AM The LX5511 is an advanced InGaP HBT amplifier that provides a power gain of up to 28dB when operating in the 2.4-2.5GHz frequency band for 802.11 b/g applications. Featuring active bias, power detection, on-chip input/output matching plus the low current consumption required in portable applications, the LX5511 is positioned between the LX5510B at 19dB and the LX5512E at 32dB in Microsemi's WLAN portfolio... http://www.wirelessdesignonline.com/product.mvc/LX5511-WLAN-Power-Amplifier-0002?atc~c=771+s=771+r=001+l=a 7/14/2006 1:41:00 PM The MIL-NLDCBS1X3 GPS antenna splitter is a one input three output power divider designed specifically for the GPS L1 & L2 carrier frequencies. The three output legs (J2-J4) are DC-Blocked to prevent antenna damage http://www.wirelessdesignonline.com/product.mvc/GPS-Passive-MIL-Spec-Splitter-1X3-0001?atc~c=771+s=771+r=001+l=a 4/5/2006 8:21:00 AM Designed to provide OEMs with license-free communications over long distances, AC4868 transceiver becomes the essential, affordable alternative to products operating in the saturated 433MHz band. It is the only fully certified 868MHz transceiver to deliver 250mW of output power, ideal for highly industrial European applications where reliable data deployment is crucial... http://www.wirelessdesignonline.com/product.mvc/868-MHz-Transceiver-0001?atc~c=771+s=771+r=001+l=a 8/2/2005 11:41:00 AM The MX785101A W-CDMA Virtual Test System (VST) has been specifically designed to support rapid development, verification and subsequent validation of Layer 3 and Layer 2 protocols for 3GPP W-CDMA User Equipment (UE) independently of Layer 1 Physical Link and RF sub-layers. http://www.wirelessdesignonline.com/product.mvc/MX785101A-W-CDMA-Virtual-Test-System-VST-0002?atc~c=771+s=771+r=001+l=a 1/14/2005 7:41:00 AM The new 50S-1352 from JFW Industries is a high-power, RF "hot switch" that covers cellular, PCS, UMTS frequencies, and beyond. http://www.wirelessdesignonline.com/product.mvc/1P2T-Solid-State-RF-Switch-0001?atc~c=771+s=771+r=001+l=a 10/5/2004 3:12:00 PM Corry Micronics releases for production a series of press-in EMI filters. The filters are designed to minimize installation time while delivering the same filtering performance as Micronics' standard bolt-in feedthrus... http://www.wirelessdesignonline.com/product.mvc/Press-In-Filters-0001?atc~c=771+s=771+r=001+l=a 3/27/2003 3:44:00 PM RF Micro Devices has released five gain blocks for ISM, cellular, and PCS applications http://www.wirelessdesignonline.com/product.mvc/Silicon-Based-Gain-Blocks-0001?atc~c=771+s=771+r=001+l=a 5/14/2002 9:15:00 AM