Corry Micronics offers a complete line of RF switches. The RF switches are controlled by pin diodes that cover a frequency range of 20MHz to 18GHz. The switches are offered as either the reflective or non-reflective style of RF switch. Many of our RF switches have been installed in communications systems, test equipment, filter selectors and antenna selectors...
This Front End Module (FEM) is ideal for applications involving WiMAX, LTE TDD, Customer Premises Equipment (CPE), Data Card and Terminals, and Spread-Spectrum and MMDS Systems.
This front end module (FEM) features an ultra-small form factor and is ideal for IEEE802.11a/n/ac WiFi applications, 4.9GHz to 5.85GHz ISM Band applications, applications involving portable battery powered equipment, and applications involving WiFi access points, gateways, and set top boxes.
The hottest news in town is not that we put two amplifiers in a single chassis, but for the first time you can go all the way from 0.7 to 18 GHz with the reliability of solid state. Our Dual Band Amplifiers can be used for multiple applications because they are linear and extremely load tolerant.
This switch has been optimized for use in 3G, LTE, cellular, WiBro, WiMAX, and other high performance communications systems.
MS202xC/MS203xC VNA Master™ series of handheld vector network analyzers (VNAs) provides the performance and capabilities of numerous benchtop instruments in a single highly-portable analyzer.
The MT8820C is an all-in-one Radio Communication Analyzer that is the ideal solution to test LTE, 3G and 2G wireless devices. This Radio Communication Analyzer supports all test functions including signaling, TX parametric, and RX parametric tests. Leveraging the strengths of its predecessor, the MT8820B, the new MT8820C allows users to reduce cost and space over other solutions. The MT8820C Radio Communication Analyzer can be used with wireless devices that operate between 30 MHz and 2.7 GHz. In addition, the MT8820C maintains backwards compatibility with MT8815B and MT8820B software to accelerate test station setup and reduce installation cost and time when upgrading.
Regulatory requirements are growing. You're under increasing pressure to cut costs. And improving system uptime is always a top priority. The MS2713E Spectrum Master helps you do all of this and more.
To keep up in today's rapidly evolving wireless communications market, you need tools that enable you to efficiently maintain legacy networks in addition to the new 3G and 4G networks now being installed. And with rate of market expansion, you're being required to service more base stations than ever before. This means completing sweeps quickly, performing calibrations instantly, and implementing fast trace naming while in the field.
Mobile phones are evolving into rich-content multimedia terminals supporting high-speed communications based on the new 3GPP LTE standard. The MD8430A Signalling Tester is an essential base station simulator, for testing LTE chipsets and mobile terminals. It is the perfect test solution for bringing LTE terminals to market as quickly as possible, based on Anritsu's extensive knowledge of cellular mobile technologies.
The MG3690C series of broadband signal generators covers audio, HF, VHF, UHF, RF and microwave frequencies from 0.1 Hz to 70 GHz in single coaxial output and up to 325 GHz or beyond, with external multipliers. Thus, the MG3690C series is an ideal signal source for both RF and microwave requirements, fully configurable for simple to high performance applications.
Anritsu Company introduces the MT8222B BTS Master, its next-generation handheld base station analyzer that supports 4G standards now being deployed, as well as installed 2G/3G networks. Combining the inherent advantages of the BTS Master platform with new measurement capability, the MT8222B provides field engineers and technicians with a lightweight, handheld analyzer that can accurately and quickly measure all the key wireless standards, including LTE, WiMAX, WCDMA/HSDPA, CDMA/EV-DO and GSM/EDGE.
CombiTest is designed to support the full test and measurement capabilities of the MT8860B and MT8860C WLAN Test Set. Consequently, test plans can be created for use in both "Network" and "Direct" modes of operation.
These GaAs MMIC IQ Downconverters from RFMD are ideal for point-to-point and VSAT applications.
The ML2488B Wideband Peak Power Meter provides accurate peak power measurement for communications, wireless, and aerospace applications. For the design and implementation of wireless networks, they address the important issues of power control, peak power, and timing.
