Products and Services
Rack Mount GPS Splitter 1X8
Source:
GPS Networking
The RMHIALDCBS1X8 GPS Amplified Splitter is a one input, eight output device in a Rack Mount Chassis. The frequency response covers the GPS L1 & L2 bands with excellent gain flatness
Click Here To Download:
•Datasheet: Rack Mount GPS Splitter 1X8
•Datasheet: Rack Mount GPS Splitter 1X8
•Datasheet: Rack Mount GPS Splitter 1X8
The RMHIALDCBS1X8 GPS Amplified Splitter is a one input, eight output device in a Rack Mount Chassis. The frequency response covers the GPS L1 & L2 bands with excellent gain flatness. In the normal configuration, one of the splitter RF outputs (J1) passes DC from the connected GPS receiver through the splitter to the antenna, allowing the GPS receiver to power both the antenna and the splitter amplifier. The other RF outputs (J2, J3, J4, J5, J6, J7, J8) are DC loaded with a 200 Ohm resistor to simulate the antenna current draw.
Features
- Amplifier Gain of 13dB
Gain = 13dB
- Extremely Flat Group Delay
Less that 1ns variation
- Phase Matched Outputs
Phase (J1 – J2) < 1.0o
Click Here To Download:
•Datasheet: Rack Mount GPS Splitter 1X8
Need More Information? Just Ask.
Click the button below to directly contact the supplier. Use it to:
- Ask a question.
- Request more detailed information or literature.
- Discuss your current project/application.
- Request a quote.
- Locate a distributor in your area.
- Schedule a demo.
