90º High Power Hybrids
Corry Micronics 90º high power hybrids cover a frequency range from 870 MHz to 2,200 MHz. A 90º hybrid has two outputs that maintain the same output level but the signals on the two outputs are 90º apart. On our hybrids there is a fourth termination or isolation port that absorbs half of any reflected signals from any mismatch on either output...
Corry Micronics 90º high power hybrids cover a frequency range from 870 MHz to 2,200 MHz. A 90º hybrid has two outputs that maintain the same output level but the signals on the two outputs are 90º apart. On our hybrids there is a fourth termination or isolation port that absorbs half of any reflected signals from any mismatch on either output. This design effectively protects the input circuit which is typically a transmitter circuit.
The Corry Micronics's high power hybrids are engineered to have a low VSWR and a low insertion loss. Our series of high power hybrids have power ratings of up to 450 Watts. The 90º high power hybrids come standard with a female N connector.
Custom designs are available with a minimum order commitment.
Click here to view our PDF Specification Sheet for all High Power Hybrids
|
Part Number |
Frequency (MHz) |
Insertion Loss (dB) |
VSWR |
Isolation (dB) |
Amplitude Balance (dB) |
Phase Balance (°) |
Forward Power (W) |
|
|
Input |
Output |
|||||||
|
800 - 1000 |
3 ± 0.3 |
1.2 |
1.2 |
25 |
± 0.3 |
2 |
250 |
|
|
1700 – 2200 |
3 ± 0.3 |
1.2 |
1.2 |
25 |
± 0.2 |
2 |
250 |
|
|
870 – 880 |
3 ± 0.3 |
1.15 |
1.15 |
20 |
± 0.15 |
2 |
150 |
|
|
935 – 960 |
3 ± 0.3 |
1.15 |
1.15 |
20 |
± 0.15 |
2 |
450 |
|
|
1710 - 1880 |
3 ± 0.3 |
1.15 |
1.15 |
20 |
± 0.15 |
2 |
150 |
|
Click here to view our PDF Specification Sheet for all High Power Hybrids